The desired water temperature is easily & accurately obtained when using the CLIMA thermostatic cartridge.
There is no trial and error or inconvenience in arriving at a desired temperature. It's as simple as setting the temperature and turning on the tap. Change the flow as many times as you wish, the desired temperature is always accurately maintained.
CLIMA thermostatic cartridges are built to last. Their solid, robust construction and the quality of the materials used are all warranteed against defects.
CLIMA thermostatic cartridges are calibrated to supply water at 38C at the position shown on the scale. Each thermostatic is then thoroughly tested and labelled with an inspection label which is then packed in the box with the thermostat.
They are ground and certified as to material used, dimensions and load. The cost of these springs is four times as.
They are used to give the cartridge a longer life span and higher precision in that all impurities are excluded.
Wide conduits designed to give a flow rate of over 30 litres a minute.
This type of regulator is the best on the market; its main features such as life span, precision and promptness are above average.
A double O-Ring is used to give increased performance and sealing capacity. The anti-friction ring makes movement smoother and increases the life span.
Besides the usual stop set at 38C, this device enables you to set a maximum temperature limit by choosing one of the three auxiliary stop positions.
The anti-corrosion surface treatment of the moving parts has been carried out in order to increase resistance to corrosion with consequent increase in life span and precision.
When there are variations in temperature and/or water pressure, the prompt intervention of the regulator adjusts the correct mix in order to maintain the temperature set.